ALLMI lifting-team competence
ALLMI Slinger / Signaller Training UK delivered on-site nationwide by MHE Training UK for people who select lifting accessories, attach or detach loads, control load movement and communicate with a lorry-loader operator. Novice and experienced routes are available, with weekday and weekend dates subject to the live diary.
ALLMI Slinger / Signaller training UK
This course is relevant where a person is responsible for preparing a load, choosing and checking lifting accessories, attaching or detaching the load, or directing the loader-crane operator. It is particularly important when the operator cannot see the load or landing point and relies on clear, agreed signals.
The loader operator and the slinger/signaller work as one lifting team, but their roles are not interchangeable. An operator card alone does not demonstrate competence in load attachment, accessory selection or signalling.

What candidates learn
- Responsibilities within the lifting team and the boundaries of the role.
- Recognising common lifting accessories, markings, defects and compatibility issues.
- Understanding load weight, centre of gravity, stability and the effect of sling angles.
- Selecting a suitable attachment method and protecting the load and accessories.
- Establishing a safe exclusion zone and controlling people around the lift.
- Standard signals and clear communication with the lorry-loader operator.
- Practical slinging, signalling and assessment using representative loads.

ALLMI Slinger / Signaller course duration
| Candidate route | Typical duration | Maximum candidates |
|---|---|---|
| Novice | 2 days | 4 |
| Experienced | 1 day | 4 |
| Refresher | 1 day | 4 |
ALLMI currently specifies a one-day course for experienced candidates and a minimum two-day course for novice candidates, with a maximum of four candidates on a course. Candidate experience still needs to be checked before booking so the correct route is selected rather than assuming that a shorter experienced course is suitable.
ALLMI Slinger / Signaller assessment
The ALLMI assessment process is set by ALLMI and administered by the accredited instructor. It includes theoretical assessment and a practical assessment designed to confirm that candidates can carry out Slinger / Signaller duties safely and efficiently. The course therefore covers more than hand signals: candidates need to understand lifting accessories, load characteristics, sling angles, safe attachment methods, exclusion zones and practical communication with the loader-crane operator.
Card, certificate, manual and five-year validity
Successful candidates receive an ALLMI identity card and certificate, are registered on the ALLMI database and receive the ALLMI Slinger / Signaller Manual. ALLMI states that the card and certificate are valid for five years, after which refresher training and assessment are required.

Recognition for the slinger/signaller role
The ALLMI Slinger / Signaller course is approved by CSCS. Its focus is the load and lifting team: accessory selection and inspection, safe attachment, load behaviour, exclusion zones and clear signals. For the broader standards framework, read our ALLMI vs ABA standards comparison.


What your site needs
For on-site ALLMI Slinger / Signaller Training, have the following ready:
- A suitable serviceable lorry loader and a trained operator for the practical exercises.
- Representative loads and correctly certified lifting accessories relevant to the work being trained.
- A segregated practical area with suitable ground conditions and enough space for safe signalling positions and exclusion zones.
- A room or quiet area for theory, paperwork and assessment.
- Candidate experience details so the correct novice or experienced route can be confirmed.
Next step: check weekday and weekend availability, review current ALLMI pricing, or use the main ALLMI course hub to compare Operator and Slinger / Signaller requirements.
ALLMI Slinger / Signaller training cost
The instructor rate is £400 per training day for the course group, plus £50 per candidate for ALLMI materials and temporary certification. A maximum of four candidates can attend, with experience determining the appropriate route and duration. No VAT is added. See our ALLMI training cost guide for group examples, then check weekday and weekend dates. The full price is confirmed before booking.
Driver CPC available with eligible ALLMI training
A full 7-hour day of eligible ALLMI Slinger / Signaller training can count as 7 hours towards Driver CPC, subject to driver eligibility, DVSA approval of the course and training centre, and correct registration and recording. Driver CPC must be arranged at booking; ALLMI attendance alone does not automatically qualify.
Extra charges apply per person, per day for the Driver CPC add-on. The additional cost is confirmed before booking. Combining the training can reduce the need for separate CPC training days, saving you time and helping keep your drivers on the road.
Ask for Driver CPC when requesting your quotation. See ALLMI guidance and DVSA course requirements.
When a worker needs both lifting-team roles
Some employees may need both operator and slinger/signaller competence because their job includes controlling the loader and working with the load. Tell us what each person actually does; we will explain whether you need Lorry Loader Operator training, Slinger / Signaller training, or separate courses for both roles.
For a task-by-task explanation, read Operator vs Slinger / Signaller: which role does each person perform? Use the ALLMI course chooser when planning training for the whole team.

ALLMI Slinger / Signaller Training FAQs
How long is ALLMI Slinger / Signaller training?
ALLMI currently specifies one day for experienced candidates and a minimum of two days for novice candidates, with a maximum of four candidates on a course.
What does the ALLMI Slinger / Signaller assessment include?
The assessment process includes two theoretical assessments and one practical assessment. Candidates need to demonstrate that they can select and use lifting accessories appropriately, understand load behaviour and communicate effectively with the lorry-loader operator.
How long is the ALLMI Slinger / Signaller card valid?
The ALLMI identity card and certificate are valid for five years. Refresher training and reassessment are then required.
Is ALLMI Slinger / Signaller training CSCS approved?
Yes. ALLMI states that the Slinger / Signaller course is approved by CSCS.
Does a lorry-loader operator automatically count as a Slinger / Signaller?
No. Operating the loader and selecting, attaching or controlling a suspended load are separate safety-critical functions. Some workers may require both competences depending on their actual duties.
Can Slinger / Signaller training be delivered at our site?
Yes. A suitable serviceable loader, trained operator, representative loads, correctly certified lifting accessories and a safe segregated practical area are required for the practical element.
Do you offer weekend Slinger / Signaller training?
Yes. Weekday and weekend dates are available subject to our live diary and travel arrangements. Check current availability before choosing dates.
Where do you deliver ALLMI Slinger / Signaller training?
MHE Training UK provides nationwide mobile delivery on weekdays and weekends subject to the live diary and site suitability. See our coverage page or request a quotation for your postcode.
Find ALLMI Slinger / Signaller training in your county
Use the ALLMI training by county directory to find information for your area. Send your site postcode, candidate experience and preferred dates so we can confirm suitable nationwide delivery arrangements.
Slinger/Signaller course reviews
Feedback from candidates trained by Damian Jamieson, including courses delivered on behalf of other training providers.
The excerpts below come from written course feedback forms. Spelling, capitalisation and punctuation have been tidied; omitted text is marked with an ellipsis.
“One of the best courses I’ve done.”
Course participant
“Damian is an excellent instructor. My success is down to his professional approach and teaching.”
Course participant
“Damian explained everything in a clear manner. Helped out on various questions I asked…”
Course participant
“Course content very good, instructor explained things very well.”
Course participant
Arrange training at your site
- Confirm whether candidates need the novice, experienced or refresher route.
- Send the training postcode, candidate numbers and normal lifting duties.
- Confirm the loader, lifting accessories and representative loads available on site.
- Use the live availability page to select every suitable weekday or weekend.
- Request the written quotation once the site and candidate requirements are clear.
Tell us the machine type, candidate experience, postcode and preferred dates. We will confirm the right course route, duration, site requirements and total price before you book.
Request an ALLMI Slinger / Signaller quotation View weekday and weekend availability










